Share:
SNAP-ON Electronic Manual Torque Tester/ Calibrator / Model: TTC2000SYS
Contact Us
Category:
Torque Tester
Quantity:
| Units Of Measure | TORQUE: ft-lb, in-lb, in-oz, N•m, dN•m, kg•cm and kg•cm; FORCE: lbf, ozf, N, dN, kp and gf |
| Type | TTC2000 Manual Loader System |
| Printer/Computer Serial Output Port | RS232 (True), 300-19.2K Baud |
| Power Supply | UL Approved, 120 VAC/220 VAC, 50/60 Hz |
| Country Of Origin | USA |
| Histogram | Lower Set Limit, Upper Set Limit, 10 Divisions |
| Motorized Loader Power Supply | — |
| Motorized Loader Modes | — |
| Loader Control Relays | Two, Normally Open, Form A, Rated 12 DVC @ 1/2 A close contact at 110% CW or CCW or torque/force transducer range |
| Data Storage/Recall | 3,000 Measurements |
| Modes | Track, Peak Hold, First Peak, Power Tool |
| Storage Temperature Range | -20–50 °C (-2–122 °F) |
| Loader Hand Crank | Input torque 8 ft-lb Maximum, Output Torque 2,000 ft-lb Maximum |
| Computer Serial Com Port | RS232 (True), 300–19.2K Baud (Optional) |
| Torque/Force Display | Eight digit, alpha-numeric, super bright red LED, 0.55 inch character height |
| Maximum Range Display | 2-line x 16 character 5 x 8 dot-matrix LCD used for MAX. Transducer range, Units, Calibration, Date/Time, Statistics, Torque/Force or Torque Limits Set, Data Store/Recall, Printer Set Up |
| Statistical Analysis | Max, Min, Range, Mean, SigmaN, Sigma, Cp, Cpk, % Error, -NoGo, +NoGo |
| Accuracy* | ±0.25% of reading at 25 °C (with TTC Transducer calibration) |
| Operating Temperature Range | 10–32 °C (50–90 °F) |
| Capacity, digits [counts] (bit A/D) | 8 [±32,000] (16) |
| Analog Output | +(CW/-(CW) 1.8 V at Transducer Full Range Linearity, ±1% of reading |
| Temperature Drift Percentage | +0.03 °C (+0.017 °F) |
| Humidity | Up to 90% Non-Condensing |
Features
- TTC2000SYS includes: TTC2000 Monitor, Mechanical Loader and Cabinet, TTC400 4-in-1 Transducer Kit (4 in-lb–250 ft-lb), TTC12 Transducer Kit (60–600 ft-lb), TTC14 Transducer Kit (200–2,000 ft-Lb), TTC5500-1 Extension Arm, TTC5000-1 4-in-1 Transducer Bracket, 2000-SW WedgeLink Software and 2000-50-3 Download Cable
- NIST® traceable
Inquiry - SNAP-ON Electronic Manual Torque Tester/ Calibrator / Model: TTC2000SYS
