SNAP-ON Enhanced Multimeter TRMS-Color / Model: EEDM525F
SNAP-ON Enhanced Multimeter TRMS-Color / Model: EEDM525F

Share:


SNAP-ON Enhanced Multimeter TRMS-Color / Model: EEDM525F

Contact Us

Quantity:

Capacitance Yes
RPM EEDMRPMG (optional)
Battery Life (Continuous Use), hours 10
Low Pass Filter (LPF) Yes
Adjustable Trigger Level No
Temperature EEDMTEMP-1 (optional)
AC Volts 750
Basic DC Accuracy, % 0.005
Power Supply 9 V Lithium Battery (purchased locally)
Micro Amps Yes
Country Of Origin KOR
Dimensions, inches 4.7 x 7.7 x 1.6
Noise Reduction Circuit No
mS Pulse Width No
CAT Rating CATIII 750 V AC, CATIII 1,000 V DC, CATIV 600 V AC/DC
Backlight Always On
Auto Shut-off Yes
Test Leads EEDMLEADSET
Certificate of Calibration Model EEDM525FCRT
DC Amps 10
UL® Listed cULus 61010-1
Glitch Capture No
Insulation Test No
Analog Bar Graph Yes
Resistance, ohms 40M
Data Hold Yes
Nylon Pouch, Zipper Case EEDM5F-POUCH, EEDM5F-CC (optional)
Auto Range Yes
Duty/Dwell Duty Only
True RMS (Root Mean Square) Yes
AC Amps 10
Display Count 4,000 Color
Fuses EEDMFUSE-7, EEDMFUSE-8
Blown Fuse Identifier Yes
Comp. Output (USB) No
Min/Max Yes
DC Volts 1,000
Easy Open Battery and Fuse Door EEDM5F-DOOR
Color Screen Yes
Frequency Yes

Features
  • Measures ohms, AC/DC volts, true-RMS AC, AC/DC amps, Hz frequency, capacitance and more to cover most automotive electrical needs
  • Larger 4'' color display for easy reading and quick identification of symbols
  • (note: The tradeoff for the large color display- unit is not recommended for use in sunlight)
  • CAT-III 1,000 V AC and CAT-IV 600 V AC hybrid safety ratings mean its safe to use on hybrids
  • Convenient test lead storage wrap with retention strap
  • Built-in tilt stand and optional strap hanger (EEDMMAGSTRAP) for easy viewing
  • Button Functions: Auto or manual range, record mode, hold/lock, duty cycle, low pass filter and second functions
  • 7-year warranty
  • COLOR LCD 4,000 count, 41 segment bar graph
  • Record mode stores min/max readings
  • Ability to manually select range or allow auto ranging
  • Select continuity buzzer or diode test (displays yellow)
  • OHMS measures resistance in plug wires, coils, sensors and continuity
  • DC mV 40 mV range w/0.01 mV high-resolution accurate low volt readings
  • DC V Measure up to 1,000 V, test circuits and sensors
  • TRUE RMS (AC) Root Mean Squared vs avg rectified, use for ABS wheel sensors
  • Hz/ DUTY CYLE Measure in percentage the on time of sensors
  • REL Relative mode factors out lead resistance for improved low-ohm measures or differential
  • HOLD Lock the reading in hard to reach location for later reference
  • LPF Activate Low Pass Filter to reduce AC noise
  • AC/DC Current Measure parasitic draw from battery with ignition off
  • Hz Frequency Measure the frequency of sensors and signals
  • CAP Measure the capacitance of condensers or capacitors
  • TEMP With *optional EEDMTEMP-1 K-type adapter measure °F and °C

Internal Fuse Test:
  • Before you call the 800 number
  • Set unit to diode test with FUNCTION button
  • Plug the black test lead into red “VΩ” input
  • Touch the prod end of black lead red “A” input
  • If the meter reads “OL” fuse is blown, replace
  • If there is a reading other than “OL” fuse is OK
  •  Technical Support: 888-382-6522


 Inquiry - SNAP-ON Enhanced Multimeter TRMS-Color / Model: EEDM525F

Only .JPG, .PNG, .JPEG & PDF Files
 
Visit our web portal to view/download product literature/catalogue for full range of industrial products:
www.alliance-supplies.com