SNAP-ON Traditional Digital Multimeter / Model: EEDM503D
Contact Us
Category:
Automotive Digital Multimeters
Quantity:
Capacitance | No |
RPM | EEDMRPMG (opt.) |
Low Pass Filter (LPF) | No |
Case or Zipper Pouch | EEDM504B4 (opt.) |
Adjustable Trigger Level | No |
Temperature | EEDM506C†(opt.) |
AC Volts | 750 |
Basic DC Accuracy, % | 0.50 |
Micro Amps | Yes |
Country Of Origin | KOR |
Dimensions, inches | 7-3/4 x 3-3/4 x 1-1/2 |
Noise Reduction Circuit | No |
mS Pulse Width | No |
CAT Rating | CATII 750 V AC, CATII 1,000 V DC, CATIII 600 V AC/DC |
Backlight | No |
Auto Shut-off | No |
Test Leads | EEDM504B3 |
Certificate of Calibration Model | — |
DC Amps | 10 |
UL® Listed | cULus 61010-1 |
Glitch Capture | No |
Insulation Test | No |
Analog Bar Graph | No |
Resistance, ohms | 20M Ohm |
Data Hold | Yes |
Auto Range | No |
Duty/Dwell | No |
True RMS (Root Mean Square) | No |
AC Amps | 10 |
Display Count | 2,000 |
Fuses | EEDMFUSE-1, EEDMFUSE-4 |
Blown Fuse Identifier | Yes |
Comp. Output (USB) | No |
Min/Max | No |
DC Volts | 1,000 |
Easy Open Battery and Fuse Door | Yes |
Color Screen | No |
Frequency | No |
Features
- Large, easy-to-read, 2,000-count LCD display
- Push-button on/off
- Ohm measure function determines coil or spark plug resistance
- Continuity buzzer tests continuity of fuses, fusible links, components and circuits
- Diode test—use the diode function to test the diode pack on a typical alternator
- DC amps—measure DC current to determine the presence of a parasitic load; measures current draw of branch circuits
- Data-H (Data hold)—lock reading on the display in locations where it is difficult to read, or for future reference
- DC volts—Use DC voltage to verify if the proper voltage level is arriving at a sensor of circuit
- AC volts—measure AC voltage signals on digital MAF sensors, wheel speed sensors and vehicle speed sensors
- AC amps—measure the current draw of AC-powered equipment in the shop
- Tilt stand—is built-in into the instrument housing
- Separate fuse/battery compartment—easily removed for battery/fuse replacement. Fuses are labeled with replacement number
Inquiry - SNAP-ON Traditional Digital Multimeter / Model: EEDM503D