Share:
SNAP-ON Advanced Multimeter APP-CERT / Model; EEDM596FKCRT
Contact Us
Category:
Automotive Digital Multimeters
Quantity:
| Capacitance | Yes |
| RPM | Yes |
| Low Pass Filter (LPF) | Yes |
| Replacement Fuses | EEDMFUSE-7 and EEDMFUSE-8 |
| Adjustable Trigger Level | Yes |
| AC Volts | 750 |
| Basic DC Accuracy, % | 0.1 |
| Battery Type | 9 Volt Lithium Metal (Not sold through Snap-on, purchase locally) |
| Micro Amps | Yes |
| Country Of Origin | KOR |
| Dimensions, inches | 7.7 x 4.7 x 1.6 |
| Noise Reduction Circuit | Yes |
| Case or Zipper Pouch (Included) | EEDM5F-CC |
| Temperature, (Included) | EEDMTEMP-1 |
| mS Pulse Width | Yes |
| CAT Rating | CATIII 750 V AC, CATIII 1,000 V DC, CATIV 600 V AC/DC |
| Backlight | Always On |
| Auto Shut-off | Yes |
| Test Leads | EEDMLEADSET |
| Certificate of Calibration Model | EEDM596FKCRT†|
| DC Amps | 10 |
| UL® Listed | cULus 61010-1 |
| Glitch Capture | Yes |
| Insulation Test | No |
| Analog Bar Graph | Yes |
| Resistance, ohms | 40 |
| Data Hold | Yes |
| Auto Range | Yes |
| Duty/Dwell | Yes |
| True RMS (Root Mean Square) | Yes |
| AC Amps | 10 |
| Display Count | 40,000 |
| Blown Fuse Identifier | Yes |
| Comp. Output (Bluetooth) | Yes |
| Display Type | Color Screen |
| Min/Max | Yes |
| DC Volts | 1,000 |
| Easy Open Battery and Fuse Door | Yes |
| Color Screen | Yes |
| Frequency | Yes |
Features
- Use in the following six quick steps: get the app, select unit of measure, connect leads to circuit, sync to remote device, take readings then diagnose, store and share results (mobile device sold separately)
- Horizontal orientation is comfortable for button and dial operation
- 115% larger color display for excellent viewing
- Bluetooth® remote display allows for one-tech testing, such as brake lights (mobile device sold separately)
- Stores customer information and test results, with the ability to share via email, text or social media (mobile device sold separately)
- CAT-III 1,000 V / CAT-IV 600 V hybrid safety rated
- Convenient test lead storage wrap with retention strap
- Built-in tilt stand and optional strap hanger (EEDMMAGSTRAP) for easy viewing
- LCD display: 4,000 count with 42-segment bar graph
- REC (record mode): store minimum, maximum and average readings over a measurement period
- RANGE: manually select range or allow auto-ranging
- AC/DC: manually select AC or DC measurement function
- FUNCTION: toggle between functions on Ohm, TEMP and IG modes
- REL (Relative Mode): factor out lead resistance for improved low ohm measurements or compare readings to a known standard—can also be used for differential measurements
- CYL (Cylinder): selects the number of cylinders in IG mode
- HOLD: lock the reading on the display for hard to read locations or future reference
- PEAK-H (Peak Hold): capture signals spikes as fast as one millisecond to diagnose intermittent events
- Hz (Frequency): measure the frequency of sensors and signals
- Ω (Ohms, Resistance): measure the resistance of spark plug wires, coils, sensors, and continuity of wiring
- AC mV and DC mV Ranges: additional 40 millivolt DC range with 0.01 mV resolution for improved accuracy when performing low voltage measurements
- DC V, AC V (DC Volts, AC Volts): measure the voltage of circuits, sensors and ABS wheel sensors
- TEMP (Temperature): measure temperature with included temperature probe
- AC/DC Current Functions: measure the parasitic draw from the battery
- IP, IG (Automotive Functions): measure RPM, Duty, Dwell, mS pulse width, Frequency
- Quickly Test Condition of Internal Fuses: determine the status of the internal fuses before you open the battery/fuse compartment
- Built-in Tilt Stand: tilt stand is built into the instrument housing, adding strength and integrity to the design
- Capacitance: measure the capacitance of condensers or capacitors found in today's hybrid automobiles
- Technical Support 888-382-6522
Inquiry - SNAP-ON Advanced Multimeter APP-CERT / Model; EEDM596FKCRT
