SNAP-ON Basic Multimeter TRMS-Daylight / Model: EEDM504F
Contact Us
Category:
Automotive Digital Multimeters
Quantity:
Capacitance | Yes |
RPM | EEDMRPMG (opt.) |
Low Pass Filter (LPF) | No |
Adjustable Trigger Level | No |
Temperature | EEDM506C (opt.) |
AC Volts | 750 |
Basic DC Accuracy, % | — |
Micro Amps | Yes |
Country Of Origin | KOR |
Dimensions, inches | 7-3/4 x 3-3/4 x 1-1/2 |
Noise Reduction Circuit | No |
mS Pulse Width | No |
CAT Rating | CATII 750 V AC, CATII 1,000 V DC, CATIII 600 V AC/DC |
Backlight | Yes |
Auto Shut-off | After Approx. 15 minutes (can be disabled) |
Test Leads | EEDMLEADSET |
Certificate of Calibration Model | EEDM504FCRT†|
DC Amps | 10 |
UL® Listed | cULus 61010-1 |
Glitch Capture | No |
Insulation Test | No |
Analog Bar Graph | Yes |
Resistance, ohms | 40M |
Data Hold | Yes |
Auto Range | Yes |
Duty/Dwell | Yes |
True RMS (Root Mean Square) | Yes |
AC Amps | 10 |
Display Count | 4,000 |
Soft Pouch | EEDM5F-POUCH |
Fuses | EEDMFUSE-1, EEDMFUSE-2 |
Blown Fuse Identifier | Yes |
Comp. Output (USB) | No |
Min/Max | Yes |
DC Volts | 1,000 |
Easy Open Battery and Fuse Door | Yes |
Color Screen | No |
Frequency | Yes |
Features
- Measures ohms, AC/DC volts, true-RMS AC, AC/DC amps, Hz frequency and more to cover many automotive electrical needs
- Large, white backlit display for easy reading, plus quick identification of symbols in low light conditions and with the backlight off—the best Snap-on® meter in bright daylight
- Convenient test lead storage wrap with retention strap
- Built-in tilt stand and optional strap hanger (EEDMMAGSTRAP) for easy viewing
- Hz/Duty (Duty Cycle)—measure in percent the ON time of sensors or other devices
- REC (record mode)—store minimum and maximum readings over a measurement period
- LCD display—4,000 count with 41-segment bar graph
- Seven-year limited warranty
- TRUE-RMS—True-RMS measurement on ACV and ACA for accurate readings on all types of of AC waveforms
- High-resolution DC mV range-additional 40 mV range with 0.01 mV resolution for improved accuracy when performing low-voltage measurements
- ACV (AC Volts)—measure the voltage of ABS wheel sensors
- DCV (DC Volts)—measure the voltage of circuits and sensors
- Separate fuse/battery compartment—easily removed for battery/fuse replacement
- REL (Relative Mode)—factor out lead resistance for improved low ohm measurements or compare readings to a known standard; can also be used for differential measurements
- Hold—lock the reading on the display for hard to read locations for future reference
- Ohms/Resistance—measure the resistance of spark plug wires, coils, sensors, and continuity of wiring
- AC/DC Current Functions (Amps)—measure the parasitic draw from the battery with ignition off
- Hz (Frequency)—measure the frequency of sensors and signals
- Separate Fuse/Battery Compartment—easily removed for battery/fuse replacement
- Technical Support: 888-382-6522
- Internal Fuse Test: • Before you call the 800 number • Set unit to diode test with FUNCTION button • Plug the black test lead into red “VΩ” input • Touch the prod end of black lead red “A” input • If the meter reads “OL” fuse is blown, replace • If there is a reading other than “OL” fuse is OK
Inquiry - SNAP-ON Basic Multimeter TRMS-Daylight / Model: EEDM504F