Share:
SNAP-ON Digital Hybrid Multimeter (Certificate Of Calibration) / Model: EEDM604ECRT
Contact Us
Category:
Automotive Digital Multimeters
Quantity:
| Capacitance | Yes |
| RPM | EEDMRPMG (opt.) |
| Low Pass Filter (LPF) | No |
| Case or Zipper Pouch | EEDM650CPB |
| Replacement Fuses | EEDM604C1 EEDM604C2 |
| Adjustable Trigger Level | No |
| Temperature | EEDMTEMP-1 |
| AC Volts | 1,000 |
| Basic DC Accuracy, % | 0.05 |
| Micro Amps | Yes |
| Country Of Origin | KOR |
| Dimensions, inches | 3-13/16 x 8 x 2-13/32 |
| Noise Reduction Circuit | No |
| mS Pulse Width | Yes |
| CAT Rating | CATIII 1,000 V CAT IV 600 V |
| Backlight | Yes |
| Auto Shut-off | Yes |
| Certificate of Calibration Model | EEDM604ECRT |
| DC Amps | 10 |
| UL® Listed | cULus 61010-1 |
| Glitch Capture | Yes |
| Insulation Test | No |
| Analog Bar Graph | Yes |
| Resistance, ohms | (plus conductance) |
| Data Hold | Yes |
| Auto Range | Yes |
| Duty/Dwell | Yes/Duty |
| True RMS (Root Mean Square) | Yes |
| AC Amps | 10 |
| Display Count | 50,000 |
| Blown Fuse Identifier | Yes |
| Comp. Output (USB) | No |
| Min/Max | Yes |
| DC Volts | 1,000 |
| Easy Open Battery and Fuse Door | EEDM650C-6 |
| Color Screen | Yes |
| Frequency | Yes |
Features
- Color VA Type LCD Display - 50,000 count with 51 segment bar graph
- Triple Display - activated with REC, REL, PEAK-H buttons
- REC (Record Mode) - store minimum, maximum and average readings over a measurement period
- RANGE - manual range option for each function
- PEAK-H - peak hold button engages .25 millisecond rapid signal capture function to catch glitches
- COMP (Compare) - activates the compare function to compare your reading against a known standard
- REL% (Relative Percent Mode) - factor out lead resistance for improved low ohm measurements or compare readings to a known standard - can also be used for differential measurements
- EDIT - use in conjunction with the COMP and arrow buttons to set the standard value for comparing readings
- Gray Button - use to select gray functions noted on meter
- HOLD - lock the reading on the display for hard to read locations for future reference
- Ohms, Conductance, Continuity - toggle between measuring resistance, conductance and continuity buzzer
- ACmV/ DCmV(AC or DC millivolts) - measure up to 500 AC or DC millivolts
- ADP (Adaptor mode) - direct readout on the LCD when using optional accessories
- DCV (DC Volts) - measure up to 1,000 V
- ACV/Hz (AC Volts and Frequency) - measure up to 1,000 V AC - Push the grey button to view frequency, duty, and mS pulse width of the signal
- Diode Test - test for good, open, or shorted diodes in circuits
- CAP (Capacitance) - measure the capacitance of condensers and capacitors
- Hz (Frequency) - measure the frequency, duty and pulse width of sensors and signals. Also used to measure temperature (gray button)
- AC/DC Current Functions (Amps) - measure the parasitic draw from the battery with ignition off
- External Testing of Internal Fuses - you can determine the status of the internal fuses before you open the battery/fuse compartment
- Protective boot and built-in tilt stand
- Technical Support 888-382-6522
Inquiry - SNAP-ON Digital Hybrid Multimeter (Certificate Of Calibration) / Model: EEDM604ECRT
