Share:
SNAP-ON 15 Amp Parasitic Draw Test Harness with Resettable Breakers / Model: EEDM15APD
Contact Us
Category:
Multimeter Accessories
Quantity:
| Cord Color/Type | Black Silicon Straight (non-coil) |
| Voltage | 12 V DC |
| Operating Temperature | 0–120 °F (-18–49 °C) |
| Replacement Cord Assembly | None—replace entire unit for safety |
| Computer Safe | Yes |
| Length, inches (mm) | 34.8 (884) |
| Terminal End | Heavy-Duty Copper Plated Steel Clip (EECTCLIPHD-B) |
| Polarity | Bi-Directional |
| Country Of Origin | KOR |
| Weight, lb (g) | 0.4 (180) |
| Warranty | 1 Year (field repairable) |
| Surge Protected | Yes, resettable circuit breakers |
| Resettable Breaker from switch to meter | 7.5 A, protects meter fuse |
| Outside Wire Diameter, inches (mm) | .14 (4) |
| Range | 0–15 V DC |
| Resettable Breaker from battery to switch | 15 A, protects circuit |
| Cord Length, ft (m) – gauge | 2.4 (.7) – 18 |
Features
- Locate bad components or modules draining vehicle battery voltage and reducing life
- Works with Snap-on multimeters (sold separately) to measure current draw in components, modules and circuits with the engine off
- Tap into the ground side of the vehicle battery terminal and circuit, connect to pre-owned multimeter COM and 10 A ports to begin the test (see user manual for complete instructions)
- 15 A resettable breaker: save fuse expense, replacement time and help with user safety
- Heavy duty switch: positive click feedback has longer life than standard switch
- Heavy duty clips: create a positive connection and are field replaceable
- Silicone wires: perform in hot and cold environments
- Technical Support: 888-382-6522
- US Patent (#9,928,938)
Inquiry - SNAP-ON 15 Amp Parasitic Draw Test Harness with Resettable Breakers / Model: EEDM15APD
