Share:
SNAP-ON 140 A Workhorse MIG Welder / Model: MIG140
Contact Us
Category:
SNAP-ON 115 Volt MIG Welders
Quantity:
| Wire Size, inches (mm) | .023–.035 (.58–.89) |
| Spot Weld Time (sec) | N/A |
| Shipping Weight, lb | 176 |
| Dimensions, inches (W x D x H) | 14-1/2 x 26.3 x 32.3 |
| Warranty* | 2 Years |
| Voltage Settings, MIG/TIG | 6/3 |
| Welding Capacity, inches | 1/4 |
| Country Of Origin | USA |
| Arc Voltage, V DC | 14–26 |
| Input Voltage | 115 V AC, 50/60 Hz 1-ph |
| Machine Weight, lb | 140 |
| Ground Cable Length, feet (m) | 10 (3) |
| Welding Capacity, Single Pass, inches | 1/4 |
| Detatchable Feeder | No |
| Spot-Stitch | No |
| Gas Regulator-Flowmeter | Yes |
| Wire Speed, in/min | 10/800 |
| Power Input Cable Length, feet (m) | 20 (6) |
| Remote Feeder Input Voltage (VAC) | N/A |
| Open Circuit Voltage, V DC | 16–34 |
| Output Amperage Max, amps | 140 |
| Torch Length, feet | 10 |
| Input Amperage (recommended) | 30 |
| Torch Neck Angle | 60° |
| Feeder Cable Length, feet | N/A |
| Duty Cycle Rating | 60% @ 140 A |
| Welding Current Range (amps) | 30–140 |
Features
- All-copper wound transformer features Nomex® insulation and bolted lamination to provide precise voltage control and repeatable welds
- Capacitor bank and diode set delivers consistent voltage and industry-leading smooth-arc characteristics
- Wire feed assembly is constructed of precision machined cast aluminum and features all-metal gearing and powerful 800 in/min delivery for consistent wire speeds
- Welds 1/4'' in a single pass with 140 A max output at 60% duty cycle
- Wire feed assembly is constructed of precision machined cast aluminum and features all-metal gearing and powerful 800 in/min delivery for consistent wire speeds
- No need to purchase a welding cart—complete running gear along with flow-meter/regulator and welding wire
- No limit on performance when wall outlet power is limited
- Technical Support: Industry-leading technical support of over 30 years of experience by calling 800-ABC-WELD to speak with a live expert
- Optional Accessories: MHG5A Aluminum Spool-gun, CKSTP2125A DC TIG Conversion Kit, CKSMPK1 Parts and Consumables Kit
Inquiry - SNAP-ON 140 A Workhorse MIG Welder / Model: MIG140
