Share:
Specifications
- Made in America: Yes
- Type: Height Transfer Gage
- : Base Size (Approximate) 5-3/4'' L x 3-1/2'' W (145mm x 90mm)
- Range (in): 0-14''
- Range (mm): 0-350mm
- Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
- Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
- Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
- Hand-fitting base design for sure-grip handling and easy movement
- Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
- Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
- Thumb screw allows slide to be locked
- Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
- A snug on the slide provides two holes (.375'' [9.5mm] and .156'' [4mm]) for holding gage rods or scribers
- The rod has a major diameter of .375'' (9.5mm) and stepped diameters of 1/4'' (3.2mm) and 7/32'' (5.5mm) at one end and 5/16'' (8mm) at the opposite end.
- Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod
Inquiry - STARRETT Height Transfer Gage / Model: 252Z-14
