Share:
| Metric | Imperial | |
|---|---|---|
| Model | CP7748TL | |
| Part number | 8941077487 | |
| Actual air consumption | 12 l/s | 25 cfm |
| Air inlet thread size | 1/4 '' | |
| Average air consumption | 3 l/s | 6.2 cfm |
| Blows per minute | 1350 | |
| Box dimensions | 95x210x240 mm | 3.75x8.25x9.45 '' |
| Clutch type | Twin Hammer | |
| Dimension A | 65.4 mm | 2.57 '' |
| Dimension B | 69.8 mm | 2 3/4 '' |
| European Directives | 2006/42/EC (17/05/2006) | |
| European Sound standard | ISO 15744 | |
| European Standards | EN ISO 11148-6:2013 | |
| Free speed | 7000 rpm | |
| Free speed (fwd) | 2400 rpm | |
| Handle type | Pistol | |
| Height | 200 mm | 7.87 '' |
| Length | 175 mm | 6.89 '' |
| Maximum Torque (reverse) | 1300 Nm | 960 ft.lbs |
| Min. hose size | 10 mm | 3/8 '' |
| Net weight | 2 kg | 4.4 lb |
| Side to center | 39 mm | 1 1/2 '' |
| Socket retainer | Friction ring | |
| Sound Power | 105.3 db(A) | |
| Sound pressure | 94.3 db(A) | |
| Sound uncertainty | 3 db(A) | |
| Square drive | 1/2 '' | |
| Vibration | 12 m/s² | |
| Vibration (fwd) | 7.57 m/s² | |
| Vibration ISO | ISO 28927-2 | |
| Vibration uncertainty (K) | 4.5 m/s² | |
| Width | 78 mm | 3 '' |
| Working Torque Range (fwd) | 90 - 140 Nm | 66 - 103 ft.lbs |
Features
- 1 position torque limited in forward around 66 ft.lbs / 90 Nm
- 960 ft.lbs / 1,300 Nm of maximum torque
- One-hand reverse system (Ring system)
- 6.89 in. / 175 mm of length
- Hard anodized end plates
- Hard chromium aluminum cylinder
- Twin hammer mechanism4.4 lbs – 2.0 kg thanks to its composite motor housing
- Curved handle with rubber material
- Resistant to most chemicals used in workshops
- Rubber grip at the back
- Does not slip when it is in operator’s hand even if it is dirty or oily
Inquiry - CHICAGO PNEUMATIC Impact Wrenches / Model: CP7748TL
