Share:
Specifications
Accessories
- Base material: Cast iron
- Weight: 2.9kg
- Sensitivity
Ⅰ： 1Division ＝ 0.01mm/m
Ⅱ： 1Division ＝ 0.05mm/m
Ⅲ： 1Division ＝ 0.1mm/m - Measuring Range (3 Range)
± 0.2mm/m（1Division 0.01mm/m）
± 1mm/m（1Division 0.05mm/m）
± 2mm/m（1Division 0.1mm/m） - Operating Temperature 0 40℃
- Pointing Error Within ± 0.5 Division
- Repeatability Accuracy Within ± 0.005mm/m
- Output SIgnal
Analog output
± 200mV F.S. （for all range）
Connectible load resistance： No less than 100 Ω - Power Source
9V dry cell 1 pc
AC adapter （DC9V output ·AC100V ～ 240V） included - Run time (continuous use)
Zinc-carbon cell： Approx. 25 hrs.
Alkaline cell： Approx. 50 hrs.
※ May vary depending upon measurement condition - Base Dimension L150 × W85 × H195mm ※ Excluding Handle (dimension: L150 × W55mm)
Accessories
- Shock resistant aluminum case
- Warranty·Instruction manual·Inspection report
- AC adapter (DC9V output·AC100V ～ 240V)
- 9V dry cell
- Leveling of machine tools and surface plates.
- Straightness and flatness measurements.
- Body: Aluminum
- Quicker response than bubble level
- Sensitivity is switchable in three steps
- Connectible directly to commonly-available analog recorder through analog output
- Custom-made base can be attached to the threaded screw holes (M5 × P0.8) at the bottom base
- Pendulum system prevents any hysteresis errors and is not influenced by temperature change
Inquiry - SK Levelnic EL-01A / Model: 010005
