Share:
YORK Carbide Burr, Uncoated, Cut 6 - Double Cut, 9.5mm, Round Tree / Model: YRK2104246K
Contact Us
Category:
Sander and Polisher Accessories
Quantity:
Specifications
All sizes are nominal with a 6mm shank unless other wise stated.
Cut Numbers:
Cut 6 - Double Cut.
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
- Cut Type: Cut 6 - Double Cut
- Finish/Coating: Uncoated
- Head Diameter: 9.5mm
- Head Length: 12.7mm
- Head Material: Carbide
- Head Shape: Round Tree
- Overall Length: 55mm
- Shank Diameter: 6mm
All sizes are nominal with a 6mm shank unless other wise stated.
Cut Numbers:
Cut 6 - Double Cut.
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
- Work piece and tools should always be steady and well supported.
- Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'.
- Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
- Always ensure that the tool is rated to the recommended operating speed of the burr.
Inquiry - YORK Carbide Burr, Uncoated, Cut 6 - Double Cut, 9.5mm, Round Tree / Model: YRK2104246K
View more
Sander and Polisher Accessories
