Share:
KENNEDY Carbide Burr, Uncoated, Chipbreaker, 12.0mm, Conical / Model: KEN2108950K
Contact Us
Category:
Sander and Polisher Accessories
Quantity:
Specifications
Conical 90° Inc. Angle.
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.
Cut Numbers:
Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
- Cut Type: Chipbreaker
- Finish/Coating: Uncoated
- Head Diameter: 12mm
- Head Length: 6mm
- Head Material: Carbide
- Head Shape: Cone
- Included Angle: 90°
- Overall Length: 40mm
- Shank Diameter: 6mm
Conical 90° Inc. Angle.
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.
Cut Numbers:
Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
- Workpiece and tools should always be steady and well supported.
- Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'.
- Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
- Always ensure that the tool is rated to the recommended operating speed of the burr.
Inquiry - KENNEDY Carbide Burr, Uncoated, Chipbreaker, 12.0mm, Conical / Model: KEN2108950K
View more
Sander and Polisher Accessories
