KENNEDY Carbide Burr, Uncoated, Chipbreaker, 19.0mm, Inverted Cone / Model: KEN2109480K

Share:


KENNEDY Carbide Burr, Uncoated, Chipbreaker, 19.0mm, Inverted Cone / Model: KEN2109480K

Contact Us

Quantity:

Specifications
  • Cut Type: Chipbreaker
  • Finish/Coating: Uncoated
  • Head Diameter: 19mm
  • Head Length: 16mm
  • Head Material: Carbide
  • Head Shape: Inverted Cone
  • Overall Length: 60mm
  • Shank Diameter: 6mm
Inverted Cone.
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.

Cut Numbers:
Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
  • Workpiece and tools should always be steady and well supported.
  • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'.
  • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
  • Always ensure that the tool is rated to the recommended operating speed of the burr.


 Inquiry - KENNEDY Carbide Burr, Uncoated, Chipbreaker, 19.0mm, Inverted Cone / Model: KEN2109480K

Only .JPG, .PNG, .JPEG & PDF Files
 
Visit our web portal to view/download product literature/catalogue for full range of industrial products:
www.alliance-supplies.com