Share:
YORK Rotary Burr, Uncoated, Cut 6 - Double Cut, 16mm, Conical / Model: YRK2108406K
Contact Us
Category:
Machine Rotary Burrs
Quantity:
Specifications
Cut 6 carbide rotary burrs feature a crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Features and Benefits
Typical Applications
Notes
Cut 6 - Double Cut.
Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
- Cut Type: Cut 6 - Double Cut
- Finish/Coating: Uncoated
- Head Diameter: 16mm
- Head Length: 30mm
- Head Material: Carbide
- Head Shape: Cone
- Included Angle: 14°
- Overall Length: 75mm
- Shank Diameter: 6mm
Cut 6 carbide rotary burrs feature a crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Features and Benefits
- Manufactured from carbide for greater hardness
- Cut 6 crosscut and double cut to improve control and chipbreaks
- Suitable for use on hard materials up to HRC65 hardness
Typical Applications
- Deburring
- Cast iron
- Cast steel
- Carbon steel
- Alloy steel
- Stainless steel
Notes
- Work piece and tools should always be steady and well supported
- Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'
- Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used
- Always ensure that the tool is rated to the recommended operating speed of the burr
Cut 6 - Double Cut.
Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
- Work piece and tools should always be steady and well supported.
- Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'.
- Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
- Always ensure that the tool is rated to the recommended operating speed of the burr.
Inquiry - YORK Rotary Burr, Uncoated, Cut 6 - Double Cut, 16mm, Conical / Model: YRK2108406K
View more
Machine Rotary Burrs
